Toll-Free (877) 606-7846 | Main: (321) 939-3244
rental
Sort by:
Default
Show:
50 Products per page
Knee Walker – Used
Knee Walkers, Patient Safety & Mobility, Walkers
Toll Free: (877) 606-7846 / Local: (321) 939-3244
Learn More$299.00
P4000-Used
4-Wheel Go-Go Elite Traveller Scooter – 12 AH Battery
4-Wheel Power Scooters, Power Scooters
| Model | Elite Traveller 3 wheel | Elite Traveller 4 wheel |
| Model Number | SC40E | SC44E |
| Front Tires | 2″ x 8″ Solid | 2″ x 7″ Solid |
| Rear Tires | 2.5″ x 8″ Solid | 2.5″ x 8″ Solid |
| Maximum Speed* | Up to 4 mph | Up to 4 mph |
| Ground Clearance | 2″ | 2″ |
| Turning Radius** | 33″ | 44″ |
| Overall Length** | 37″ | 39.5″ |
| Overall Width of Base** | 19.5″ | 19.5″ |
| Seat-to-Ground Height Range | 18.13″-20.13″ | 18.13″-20.13″ |
| Seat Type | Compact, Foldable (17″x17″) | Compact, Foldable (17″x17″) |
| Weight** | 76 lbs. | 80 lbs. |
| Seat-to-Deck Height Range | 15.75″-17.25″ | 15.75″-17.25″ |
| Battery Weight | 9 lbs. each (Battery pack is 18 lbs. with 12AH batteries) |
9 lbs. each (Battery pack is 18 lbs. with 12AH batteries) |
| Battery Requirements | (2)12AH | (2)12AH |
| Maximum Range Per Charge* | Up to 7.2 Miles (12AH) | Up to 6 Miles (12AH) |
| Battery Charger | Off-board, 2A | Off-board, 2A |
| Maximum Weight Capacity | 300 lbs. | 300 lbs. |
| Standard Body Colors | Red and Blue interchangeable shroud panels |
Red and Blue interchangeable shroud panels |
| Weight of Heaviest Piece** | 29.5 lbs. (Rear Section) | 34 lbs. (Front Section) |
| Medicare Code Coverage | K0800 – Group 1 Standard | K0800 – Group 1 Standard |
| Warranty | Lifetime limited on frame; 2-Year limited on Electronics; 2-Year limited on Drivetrain |
Lifetime limited on frame; 2-Year limited on Electronics; 2-Year limited on Drivetrain |
The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice.
*Speed & range vary with user weight, terrain type, battery charge, battery condition and tire pressure.
**Due to manufacturing tolerances and continued product improvement, this specification is subject to a variance of +/- 3%
Learn More$1,119.00
SC44E
4-Wheel Go-Go® Sport Scooter
4-Wheel Power Scooters, Featured
Learn More
| Model | Go-Go Sport, 4 wheel | |
| Model Number | SC74 | |
| Front Tires | 3″ x 9″ Solid | |
| Rear Tires | 3″ x 9″ Solid | |
| Maximum Speed* | Up to 4.7 MPH | |
| Ground Clearance | 3″ at frame, 1.5″ at motor | |
| Turning Radius** | 50.5″ | |
| Overall Length** | 43″ | |
| Overall Width of Base** | 21.25″ | |
| Seat-to-Ground Height Range | 20.5″-22″ | |
| Seat Type | Compact, Foldable (17″x17″) | |
| Weight** | 99.2 lbs. | |
| Seat-to-Deck Height Range | 17″-18″ | |
| Battery Weight | 14 lbs. each (18 AH battery pack weighs 29.5 lbs.) |
|
| Battery Requirements | (2)18AH | |
| Maximum Range Per Charge* | Up to 12 miles | |
| Battery Charger | Off-board, 2A | |
| Maximum Weight Capacity | 325 lbs. | |
| Standard Body Colors | Red, Blue | |
| Weight of Heaviest Piece** | 44 lbs. (Front section) |
$1,399.00
3-Wheel Go-Go® Sport Scooter
3-Wheel Power Scooters
| Model | Go-Go Sport, 3 wheel | |
| Model Number | SC73 | |
| Front Tires | 3″ x 8″ Solid | |
| Rear Tires | 3″ x 9″ Solid | |
| Maximum Speed* | Up to 4.7 MPH | |
| Ground Clearance | 3″ at frame, 1.5″ at motor | |
| Turning Radius** | 36″ | |
| Overall Length** | 42″ | |
| Overall Width of Base** | 21.25″ | |
| Seat-to-Ground Height Range | 20.5″-22″ | |
| Seat Type | Compact, Foldable (17″x17″) | |
| Weight** | 92.8 lbs. | |
| Seat-to-Deck Height Range | 17″-18″ | |
| Battery Weight | 14 lbs. each (18 AH battery pack weighs 29.5 lbs.) |
|
| Battery Requirements | (2)18AH | |
| Maximum Range Per Charge* | Up to 12.7 miles | |
| Battery Charger | Off-board, 2A | |
| Maximum Weight Capacity | 325 lbs. | |
| Standard Body Colors | Red, Blue | |
| Weight of Heaviest Piece** | 35 lbs. (Front section) |
Learn More
$1,329.00
3-Wheel Victory® 10 Scooter
3-Wheel Power Scooters
Learn More
| Model | Victory 10, 3 wheel | |
| Model Number | SC610 | |
| Front Tires | 3.5″ x 10″ Solid | |
| Rear Tires | 3.5″ x 10″ Solid | |
| Maximum Speed* | Up to 5.25 MPH | |
| Ground Clearance | 3″ at mid frame | |
| Turning Radius** | 42″ | |
| Overall Length** | 45.25″ | |
| Overall Width of Base** | 22.25″ | |
| Seat-to-Ground Height Range | 20.5″-22″ | |
| Seat Type | Foldable, Molded Plastic (18″x17″) | |
| Weight** | 133.5 lbs. | |
| Seat-to-Deck Height Range | 17.5-19″ | |
| Battery Weight | 24.5 lbs. each/32.5 lbs. each | |
| Battery Requirements | (2)U1 or (2)40AH | |
| Maximum Range Per Charge* | Up to 15.5 miles | |
| Battery Charger | Off-board, 3A (U-1)/ Off-board, 5A (40 AH) |
|
| Maximum Weight Capacity | 400 lbs. | |
| Standard Body Colors | Candy Apple Red | |
| Weight of Heaviest Piece** | 54.5 lbs. (Front Section) |
$1,929.00
4-Wheel Victory® 10 Scooter
4-Wheel Power Scooters
Learn More
| Model | Victory 10, 4 wheel | |
| Model Number | SC710 | |
| Front Tires | 3.5″ x 10″ Solid | |
| Rear Tires | 3.5″ x 10″ Solid | |
| Maximum Speed* | Up to 5.25 MPH | |
| Ground Clearance | 3″ at mid frame | |
| Turning Radius** | 54″ | |
| Overall Length** | 47″ | |
| Overall Width of Base** | 22.25″ | |
| Seat-to-Ground Height Range | 20.5″-22″ | |
| Seat Type | Foldable, Molded Plastic (18″x17″) | |
| Weight** | 137.5 lbs. | |
| Seat-to-Deck Height Range | 17.5-19″ | |
| Battery Weight | 24.5 lbs. each/32.5 lbs each | |
| Battery Requirements | (2)U1 or (2)40AH | |
| Maximum Range Per Charge* | Up to 15.5 miles | |
| Battery Charger | Off-board, 3A (U-1)/ Off-board, 5A (40 AH) |
|
| Maximum Weight Capacity | 400 lbs. | |
| Standard Body Colors | Candy Apple Red | |
| Weight of Heaviest Piece** | 61 lbs. (Front Section) |
$2,029.00
Wrist CPM
CPM's
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM’s constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals for CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM’s mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Wrist CPM indications:
- Post-op. ORIF of Intra-Articular Fractures of the Phalanges
- Post-op. ORIF of Diaphyseal Fractures of the Phalanges
- Post-op. ORIF of Metaphyseal Fractures of the Phalanges
- Post-op. ORIF of Epiphyseal Fractures of the Phalanges
- Post-op. Prosthetic Replacement of the MCP, PIP and DIP Joints
- Post-op. Synovectomies
- Rheumatoidal / Neurological or Post-Burn Stiffness
- Capsulotomies, Arthrolysis and Tenolysis for Post-Traumatic Stiffness of MCP, PIP and DIP Joints
- Flexor and Extensor Tendon Tenolysis
- Aponeurectomies for Dupuytrens Disease
- MCP Arthrolysis
$4,995.00
R-Wrist-CPM
Toe CPM
CPM's
Learn More
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM’s constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM’s mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Toe CPM Machine indications:
-
- Post-op. Bunionectomy
- Post-op. Joint Replacement
- Post-op. Reconstructive surgery on bone, cartilage, tendons and ligaments
- Post-op. Manipulation
$2,995.00
R-Toe-CPM
Shoulder CPM
CPM's
Learn More
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM’s constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM’s mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Shoulder CPM Machine indications:
- Post-op. Rotator Cuff Repair
- Post-op. Labral Repair
- Post-op. SLAP Repair Due to Shoulder Dislocation
- Post-op. Manipulation for Shoulder Adhesive Capsulitis
- Post-op. Shoulder Decompression for Impingement Syndrome
- Post-op. Distal Clavicle Recession
$4,995.00
R-Shoulder-CPM
Knee CPM
CPM's
Learn More
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM’s constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM’s mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Knee CPM Machine indications:
- Post-op. ACL,PCL,MCL Ligament Reconstruction with a Tendon Graft
- Post-op. Total Knee Replacement
- Post-op. Arthrotomy and Drainage for Acute Septic Arthritis
- Post-op. ORIF of Displaced Intra-articular and Diaphyseal / Metaphyseal fractures
- Post-op. Arthrotomy, Capsulotomy, Arthrolysis and Debridement for Post-traumatic Arthritis
- Post-op. Synovectomy for Rheumatoid Arthritis and Heophilic Athropathy
- Post-op. Incision and Drainage for Acute Tenosynovitis
- Post-op. Reconstructive Tendon, Ligament, Cartilage and Bone Surgery
- Post-op. Knee Ankylosis Manipulation
- Post-op. Release of Extra-articular Joint Contractures (Quadricepsplasty)
- Post-op. Medial/Lateral Meniscus repairs
- Post-op. Tibial Plateau Fracture ORIF
- Post-op. Patella Fracture ORIF
$2,995.00
R-Knee-CPM
Hip CPM
CPM's
Learn More
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM’s constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM’s mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Hip CPM Machine indications:
- Post-op. Total Hip Arthroplasty
$4,995.00
R-Hip-CPM
Hand CPM
CPM's
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM’s constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM’s mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Hand CPM Machine indications:
- Post-op. Flexor Tendon Tenolysis
- Post-op. Flexor Tendon Laceration Repair
- Post-op. Dupuytrens Contracture Release
- Post-op. PIP Joint Capsulectory
- Post-op. Digital Intra-Articular Fractures
- Post-op. Digital Phalangeal-Inter-Phalangeal Joint Arthroplasty
- Post-op. Digital Metacarpal-Phalangeal Joint Arthroplasty
- Post-op. Manipulation for Hand Adhesive Capsulitis
- Reflex Sympathetic Dystrophy (RSD)
- Crush Injuries of the Hand
$4,995.00
R-Hand-CPM
Elbow CPM
CPM's
Learn More
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM’s constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM’s mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Elbow CPM indications:
- Post-op. Elbow Surgery to Prevent Muscular Atrophy and Edema
- Post-op. Elbow Cast removal to fight stiffness
- Post-op. ORIF of Elbow Fracture
- Post-op. Arthrotomy
- Post-op. Synovectomy
- Post-op. Reconstructive surgery on bone, cartilage, tendons and ligaments
- Post-op. Joint Replacement
- Post-op. Manipulation
- Stable Fractures
- Prolonged Joint Immobilization
$4,995.00
R-Elbow-CPM
Ankle CPM
CPM's, Featured
Learn More
Continuous Passive Motion (CPM) devices are used during the first phase of rehabilitation following a manipulation, soft tissue surgical procedure or trauma. CPM’s constantly move the joints through a controlled range of motion; the exact range is dependent upon the joint and controlled by the user by following physician’s instructions. In most cases the range of motion is increased over time. Speed, pause and other variables can also be programmed.
The goals CPM usage are:
- Control post-operative pain
- Reduce inflammation
- Provide passive motion in a specific plane of movement
- Protect the healing repair or tissue
- Helps prevent scar tissue formation
- Improves Range of Motion (ROM)
- Improve joint recovery
- Improve surgery success
CPM’s mechanisms of action for aiding joint recovery are dependent upon what surgery is performed. One mechanism is the movement of synovial fluid to allow for better diffusion of nutrients into damaged cartilage, and diffusion of other materials out; such as blood and metabolic waste products. Another mechanism is the prevention of fibrous scar tissue formation in the joint, which tends to decrease the range of motion for a joint.
CPM therapy benefits patients by facilitating earlier motion and earlier return to normal function. These patients also have less pain, swelling, edema, and reduction of scarring/adhesion formation. OrthoSTAT, Corp. provides CPM equipment for the Ankle, Elbow, Hand, Hip, Knee, Shoulder, Toe and Wrist.
Ankle CPM Machine indication:
- Post-op. ORIF or Closed Reduction Fracture Dislocations of Ankle and Subtalar Joints
- Post-op. Ankle and Subtalar Joint Arthroscopy with and without Repairs
- Post-op. Prolonged Immobilizations from External Fixators
- Post-op. Removal of Hardware
- Post-op. Synovectomies, Removal of Loose Bodies and Impingement Lesions
- Post-op. Total Ankle Joint Replacements
- Post-op. Repair of Achilles Tendon Tear
- Post-op. Repair Lateral Ankle Stabilization Procedures
- Post-op. Major Tendon Transfers Crossing the Ankle Joint
- Post-op. Plantar Fasciotomies and Chronic Plantar Fascitis
- Post-op. Subtalar Arthroeresis
- Post-op. Posterior Tibial Tendon Dysfunction with or without Repair
$4,995.00
R-Ankle-CPM
Featured!
City Mini Single Stroller
Strollers
Taking the City Mini to the next level, the City Mini GT gives you the ability to pave your own way. All-terrain wheels let you decide how far you want to go off the beaten path. And with little touches like an adjustable handlebar to adapt to the parent’s height, and a hand-operated parking brake, the City Mini GT is very accommodating. The City Mini GT is not intended for jogging.
Learn More$250.00
R-City-Mini-Single-Stroller